The kind of vehicle normally found inside factories, warehouses and different work locations where moving heavy materials from one location to another is required is referred to as a forklift. The mast is the mechanism situated on the front of the forklift that hydraulically raises and lowers the load. The "cat" is the protected area where the driver of the forklift sits.
Forklifts could carry loads which weigh between one to five tons. Some types can be utilized to lift shipping containers and loads which are much heavier.
Forklift tires must be maintained and checked on a regular basis. The types of tires on different forklifts differ based on factors like for instance ground surfaces, frequency of use and load weights. Every forklift operator must have access to tire press, replacement tires and a forklift jack.
Tire Maintenance Instructions
You should regularly inspect the tires. Watch for signs of damage and wear to the tires. If the wear on the tire exceeds 40%, it must be replaced.
When you purchase tires, be sure you buy the right type - pneumatic, polyurethane or solid.
When you need to replace the tires, the forklift jack should be positioned under the tire. You could easily change the tires if you raise the forklift high enough.
In order to remove the damaged tire, pull the tire from the rim using the tire press. Install the new tire and properly secure it. If you are changing more than one tire and you have just one jack, lower the forklift, and then reposition the jack at the next tire.
On-site tire repair could be performed by a repair company. If the tire is extremely large for both mobile and in-house tire presses, the damaged tire should be transported to a shop which has a stationary tire press.